WEIMA WL-4S Vertical Hopper Fed Low Noise Grinder Specifications: \n\n-- 23-1/2" x 31-1/2" (600 mm - 800 mm) hopper opening at the top, 0.8 cu. yds. (0.6 cu. m) cap.; \n\n-- 30 HP Motor w/hydraulic clutch, 14-1/2" dia. rotor grinds at 90 RPM. \n\n-- Patented "V-Rotor" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grin

WEIMA WL 4S

Weima

ExFactory

Conical Rubber Roller Conveyor Curve "CR-180", Average radius 2,500 mm (98"). \n\n-- Moplen conical roller curve, external pitch between rollers 140 mm (5-1/2"), min. length of the pieces 300 mm (11-7/8"). \n\n-- Motor-electrical installation IP55. Internal width 1,700 mm (67") machine internal width 1,400 mm (55"). Driven by means of 0.75 Kw motor-variator. Adjustable speed. \n\n-- Adjustable table height: 870 ÷ 930 mm (34-1/4" -36-1/2"). \n\n--

CEFLA CR-180 ROLLER CURVE

Cefla

GIARDINA Jet-hot Air Drying Tunnel "GP-JET-10" 40 foot long oven General Description; The air is taken externally by means of a plenum, which is equipped with filtering panels, and it is warmed by heat exchanger with finned copper/aluminium spiral pipes. It operates with recirculating movement, the solvent exhaust is achieved through over-pressure and it is controlled by gates in order to ensure air exchange and remove solvents from the building.

GIARDINA GP JET 10

GIARDINA

WADKIN K 23 Moulder Feed Through 6-Head (B,R,L,T,T,B) with working capacity of 9-1/2" x 5" capacity. \n\n-- Head sequence: Bottom 15 HP, right & left 20 HP, top 20 HP, top 15 HP and bottom 15 HP motor. \n\n-- Spindle dia.: 1-13/16" at 6,000 RPM. Mechanical digital readouts on all head adjustments except 1st bottom head; digiset readouts for left and top spindles, top heads with MDR for chipbreakers and pressure elements. \n\n-- Infeed table: 2 M 

WADKIN K-23

Wadkin

Wadkin K23

QUICK 20 Section Standard Pneumatic Clamp Carrier: \n\n-- (20) Sections with 8-1/2' width cap., \n\n-- (6) Standard zinc plated clamps per section (120 clamps total), 38" opening on clamps (other lengths available). \n\n-- Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. Equipped with: \n\n-- Panel Flattener w

QUICK 20 SECTION

NORTHTECH SL-1000XL Straight Line Rip Saw 10 HP - 4,500 RPM Direct drive overhead mounted arbor motor, Specifications\n\n-- 1" dia. arbor, 8" - 12" max. blade cap.\n\n-- 3-5/16" max. depth of cut, 8" min. part length\n\n-- 17-3/4" distance between saw & column, 50" long x 30" wide table. \n\n-- 1 HP feed motor with (3) feed speeds to feed chain with automatic chain lubrication.\n\n--Top pressure system with (6) spring loaded holddown rollers, dou

NORTHTECH SL-1000XL

CEFLA PRE / IRM TTE 3000 Infrared Preheat Oven: \n\n-- Overall dimensions: 1,300 mm (51" wide) x 3,000 mm (118.11") long. \n\n--÷ This unit has three (3) IR LAMPS to add heat to the substrate before entering the spray booth to make sure to have and even coat of finishing coating for consistence.

CEFLA PRE / IRM TTE 3000

WADKIN K 23 Moulder Feed Through 6-Head (B,R,L,T,T,B) with working capacity of 9-1/2" x 5" capacity. \n\n-- Head sequence: Bottom 15 HP, right &amp; left 20 HP, top 25 HP, top 25 HP and bottom 15 HP motor. \n\n-- Spindle dia.: 1-13/16" at 6,000 RPM. Mechanical digital readouts on all head adjustments except 1st bottom head; digiset readouts for left and top spindles, top heads with MDR for chipbreakers and pressure elements. \n\n-- Infeed table: 

FORTIS DRPU-100 Vertical Resaw w/Hydraulic Feed. Specifications: \n\n-- 39-1/2" Wheel dia., 25 HP main motor, 17-3/4" max vert. cap., 17-1/4" max. spacing of feed rolls, 8-1/2" max. opening of feed rolls. \n\n-- One piece cast iron frame, wheels with oversized bearings for vibration free cutting. The FORTIS DRPU-100 is complete with: \n\n-- Hydraulically actuated self-centering feed mechanism with (4) live feed rolls on either side; can be opened

FORTIS DRPU-100

TIMESAVERS 2321 45-006 Wide Belt Sander (3) Heads 51" width cap. Drum, Drum, Combination Head Head Configuration: 1st Head: Rubber contact roll, 30 HP motor 2nd Head: Rubber contact roll, 25 HP motor 3rd Head: Combination head with a rubber covered contact roll 5-1/2" dia. and 2-1/2" wide segmented finishing platen, 25 HP motor. Specifications:\n\n-- 51" X 103" Abrasive belts\n\n--"Posi-Trak" electronic tracking &amp; pneumatic tensioning.\n\n-- 

TIMESAVERS 2331-45-006

Timesavers

TIMESAVER 137-2HP75 Wide Belt sander (2) Heads 36" Width cap. Drum, Platen Head Configuration 1st Head: Rubber covered contact roll recently replaced, 25 HP motor 2nd Head:Finishing platen, 15 HP motor for veneer sanding Specifications\n\n--37" x 60" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning,\n\n--Roller hold-downs\n\n--Variable feed speed 15-45 FPM, 1.5 HP feed motor\n\n--Automatic conveyor belt tracking and automati

TIMESAVERS 137-2 HP75

MEREEN JOHNSON 2020 Double End Tenoner 120" Max. x 6" min. motorized opening, Led readout with keypad entry for opening , 48" infeed in front of holddowns, 6" max. thickness opening, 7" max. throat, (1) tool posts, RH fixed LH moveable. Each side equipped as follows \n\n-- 1st Station Tilting trim/hog head, worm gear tilt with indicator, 10 HP - 3,600 RPM motor, 1-1/4" dia. arbor x 1" tool space, 12" to 14" tooling dia.; \n\n-- 2nd Station: High 

MEREEN JOHNSON 2020

Mereen Johnson

BIESSE ELIX K3 CNC BORE, GLUE & DOWEL INSERTER \n\n-- Drill Dowel Inserter - Features: A single-spindle for drilling, dowel insertion unit, and glue injecting unit installed on a carriage moving in the "X" axis. The position for drilling dowel insertion is provided through simple programs through the NC control or third party software. The Numerical Control interface is intuitive, user-friendly, and very easy to use. \n\n-- Specifications: Max. p

BIESSE ELIX

Biesse

Biesse ELIX

QUICKWOOD / TIMESAVERS PRO-1400 Denibbing Sander with (8) Abrasive Brush Heads; (1) 8-Head with brush loadings, 55" max. width, (1) carousel head with (4) double arbor heads consisting of (8) counter-rotating spindles. \n\n-- Equipped with: (4) Carousel Heads: Staggered left/right and center mounted for carousel operation; each head with 2 HP motor, variable spindle speed from 300 to 1,150 RPM, inverter controlled with keypad and LED readout, 21-

QUICKWOOD PRO 1400

Quick Wood

TAYLOR 40-SECTION Automatic Clamp Carrier \n\n-- 8-1/2' width cap., \n\n-- 8 clamps per section (320) clamps total \n\n-- 32" max. clamp opening with 3-1/2" high jaws. Complete with: \n\n-- Automatic clamp Tightener, \n\n-- Automatic panel flattener \n\n-- Pneumatic rotation Machine model 800171 Note: Machine has been rebuilt in 2013 All ready tear down and ready to ship

TAYLOR 40 SECTION-A

Taylor

STANZA MC/UV 200 STANZA STM MC/UV 200 Vacuum Coater Systems for application of coatings to 3- or 4-sided product. Capacity: 12" Max. width x 2" max. height, 24" min. material length. Substrate enters a Polished Stainless Steel vacuum chamber via conveyor belt and passes through the coating head chamber: Variable speed from 40 - 200 FPM (depending on profile) as the substrate leaves the chamber; vacuum's negative pressure in the chamber keeps exce

STANMAC MC/UV 200

COSTA KK CC-CCC 1350 Wide Belt Bottom and Top Sander, (5) Heads; 53" Width capacity, Bottom (2) drums, Top (3) drums. Bottom Machine KK CC: \n\n-- Constant passline height - 1,000 mm (39"). \n\n-- Motorized infeed conveyor, length - 1,000 mm. \n\n-- Motorized infeed pressure rollers - 200 mm diameter. \n\n-- Sectioned infeed pressure beam. 1st Head: \n\n-- Rubber covered cylinder C/400, 80-Durometer, 50 HP (37 kW) Main motor. \n\n-- Pneumatic gri

COSTA KKCC-CCC-1350

COSTA machinery

SHOP SABRE "4896" CNC Router with ATC and 4th axis lathe; 48" X 96" Stationary table, moving gantry machine in a front-to-back configuration, four zone phenolic top vacuum table with a 20 HP Travini liquid ring vacuum pump system. \n\n-- Equipped with: 10 HP HSD ISO 30 type ATC spindle, variable speed from 3,000 - 18,000 RPM, and 10-position table mounted tool rack. \n\n-- Construction; Welded steel bridge and base frame construction with AC Serv

SHOP SABRE 4896

DIEHL ESL-25 Straight Line Rip Saw; Specifications: \n\n-- 15 HP Motor - 4,300 RPM belt driven fixed arbor\n\n--Thickness capacity with standard 14" blade is 1-1/2" - minimum 1/8" with 16" max. blade dia., 2-5/8" max. thickness;\n\n-- 5 HP - 1,800 RPM feed drive, Variable speed feed\n\n-- Accurate glue line cut up to 5'\n\n--19" Throat depth to right of blade; 19" of table to left of blade. \n\n-- 56" Long table. Equipped with &amp; Features: \n\

DIEHL ESL-25-II

Diehl

DODD'S C-48J DRAWER CLAMP \n\n-- Heavy-Duty vertical universal Drawer Box Clamp with fixed left jaw and motorized adjustable right clamping jaw. \n\n-- The operator loads a drawer front &amp; pair of sides into the clamp, then activates the clamping head with push button control. Then the jaws retract and the drawer bottom &amp; back are installed. The Clamp is activated once again to complete the box assembly. \n\n-- 2" - 15" Drawer height, 6" -

DODDS C-48J

WEBER MODEL KSF4 1350 DDDD WIDE BELT SANDING LINE WITH FOUR TOP STATIONS FOR HIGH-QUALITY CALIBRATION AND FINISHING &amp; WEBER MODEL KSF 3 – 1350 COO WIDE BELT SANDER WITH (3) TOP STATIONS; FOR HIGH-QUALITY ORBITAL SANDING.\n\n-- In the following configuration: Sanding Heads: \n\n-- Contact Roll Stations, heads (1), (2), (3), &amp; (4) with: \n\n-- 11.8 diameter, serrated, rubber covered, precision contact roll \n\n-- Durometer: 65, 55, 45 and 3

WEBER KSF4 1350 DDDD / KSF 3 – 1350 COO

Weber

BUSELLATO JET 6000 XL CNC MACHINING CENTER (W/ATC/BORING) \n\n-- Specifications: Working capacity "X" Axis 3,683 mm (145"), "Y" axis stroke is 1,550 mm (61"), "Z" axis stroke is 400 mm (15.7"). \n\n-- Positioning speed: X-Axis is 377 FPM (115 MPM), 246 FPM (75 MPM) on the Y-axis, and 98 FPM (30 MPM) on Z-axis; Y-axis reach of vertical routers is 49.2"(1,250 mm). \n\n-- Worktable: (8) Pneumatically locking panel supports, (3) matrix style vacuum p

BUSELLATO JET 6000 XL

Busellato

NORTHTECH NT-1300RRC-LTD Wide Belt Sander: 3-Head Wide Belt Sander, working width: 53" with Contact Roll, Contact Roll and Finishing Platen. \n\n-- 1st Head: Grooved, Rubber-Covered Contact Drum, 50 HP motor. \n\n-- 2nd Head: Grooved, Rubber-Covered Contact Drum, 40 HP motor. \n\n-- 3rd Head: Finishing Platen, 30 HP motor. \n\n-- All heads with 53" x 88" Abrasive Sanding Belts and electronic belt tracking. Feed System &amp; capacity: \n\n-- 6" Ma

NORTHTECH NT-1300RRC-LTD

Voorwood A11 Sliding Table Shaper / Sander Profiles and sands the edge of wood components. The A11 is capable of processing all the components of a five piece door and is capable of shaping and sanding straight components as well as contoured shapes using a template system. Specifications: \n\n-- Accommodates a min. substrate size of 1.5" x 3", max. 60" x 60" and thickness of 0.25" to 1/5". \n\n--The A11 is also equipped with a back gauge and edg

VOORWOOD A 11

Voorwood

UNIQUE 4540 Shape and Sand with (4) stations. General Description: \n\n-- (4) Shaper heads of which (2) may be usable for sanding (provided speed can be reduced to 2,000 RPM range - to be verified). \n\n-- Ridged one-piece welded steel frame double spindle shaper (CNC controlled jump cope & cope). \n\n-- All heads are floating and displaced via rub collars making this machine suitable for shape and sand on pre-hogged arched raised panels. \n\n-- 

UNIQUE 4540

UNIQUE

VIET S2-321-2200 Wide Belt Sander, (3) Heads 43" Width cap. Drum, Drum, Drum Calibrating Sander. Head Configuration: 1st Head: Rubber covered contact roll 7-1/2" dia. (90-shore), 25 HP motor. 2nd Head: Rubber covered contact roll 7-1/2" dia. (50-shore), 20 HP motor. 3rd Head: Rubber covered contact roll, 7-1/2" dia, (30-shore), 20 HP motor Specifications: \n\n-- Width:1,100mm (43) \n\n-- Auto On/Off Control of Each Working Unit From Main Control 

VIET S2 321 2200

VIET

WEINIG HYDROMAT H23C/001 Feed Through Moulder: 5-Head (B-R-L-T-B), working cap. 9-1/16" x 6" capacity. \n\n-- WEINIG H 23C/001 spindle sequence: Bottom 15 HP, right 10 HP, left 10 HP, top 20 HP, and bottom 15 HP motor. . \n\n-- Spindles: Dia. of 1-13/16" with cutterhead speed of 6,000 RPM; mechanical digital readouts on all spindle adjustments. Pneumatic pressure elements on left &amp; top head chipbreakers. Outboard bearings on spindles 4 an 5. 

WEINIG H 23 C/001

WEINIG

Dodds SE 15 S Dovetailer with (15) Spindles. (15) Spindles, 3 HP - 3,850 RPM motor, 10,500 RPM spindle speed; Specifications: \n\n-- 0.5 HP Feed cycle motor, automatic or÷manual cycling selection, (10 - 25) strokes/Min. \n\n-- Ball bearing spindles in an oil mist lubrication system, adjustable chip breakers. \n\n-- Cuts all (4) corners, dovetails drawer fronts-and-backs or drawer sides in pairs; (2) "quick changeover" cams (1/2" and 5/8") for eas

DODDS SE 15 S

EXTREMA XS-3B37 Wide Belt Sander, (3) Heads; 3-Head, 36" width cap. Drum, Drum, Platen; Head Configuration: \n\n-- 1st Head: 8" Dia. rubber covered contact roll, 25 HP motor. \n\n-- 2nd Head: 8" Dia. rubber covered contact roll, 25 HP motor; \n\n-- 3rd Head: Combination head with 4-7/8" dia. contact roll and 2-1/2" wide finishing platen, 20 HP motor. Specifications: \n\n-- Height adjustment of both contact rolls with dial indicators. \n\n-- 37" x

EXTREMA XS-3B37

GIBEN SMART 75 SP CNC Front Load Panel Saw 129" (3,300 mm) Overall cutting length, 2.95" (75 mm) max. blade projection. Specification & Features: \n\n-- 15 HP (11 kW) Main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment. \n\n-- Saw carriage forward travel speed 16 - 131 FPM (5 - 40 MPM), return speed 131 FPM (40 MPM); powered by AC brushless motor with inverter. \n\n-- Equipped with: Pr

GIBEN SMART 75 SP

Giben

Giben SMART 75 SP

DIEHL SL50 Straight Line Rip Saw; With 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor. Specifications: \n\n-- 16" Blade capacity. \n\n-- 2-1/2" Max. depth of cut. \n\n-- 10" Min. part length. \n\n-- 49" Width of table to the right of blade &amp; 26-5/16" to the left. \n\n-- 57" x 79" Table top size. \n\n-- 2 HP Feed drive, 65 - 195 FPM. Equipped with &amp; Features: \n\n-- Twin chain drive. \n\n-- Automatic dip lubrication. \n\n-- Top 

DIEHL SL-50

# 1. Felder BF6-31: 
5 operation machine with all components/ attachments: 3 PH. 
Sliding Table Saw, Tilted Shaper (3/4" &amp; 1 1/4" spindle), 12" Planer (4 knifes) 
12" Jointer (4 knifes) Motion table Mortiser. Including Dust Collector. Made in Austria. (Paid 25 K plus) Asking $ 12500, best offer will be considered. Time for the next generation.

Felder BF6-31

Felder

A-Z Woodcrafters Inc.

NORTHFIELD 240 STRAT-O-PLANE Top &amp; Bottom Planer Top and Bottom Helical Carbide Spiral Heads with Grinders and Jointing Bars. Specifications: \n\n-- 24" width capacity \n\n-- Min. stock length 12" and butted 6". \n\n-- Min. stock thickness 1/4". \n\n-- Helical carbide cutter heads \n\n-- Upper cutterhead motor 40 HP. \n\n-- Lower cutter head motor 30 HP. \n\n-- 1 HP Motorized thickness opening 0" to 6". \n\n-- Central distance between cutterh

NORTHFIELD 240

DMC SYSTEM TC DOBBDP Orbital and Denibbing Sander, 4-Head &amp; (1) Turbo Cleaning Unit: Ideal Sanding solution for all sanding applications, including cross grain, whitewood, stain, and sealer coats (including UV). Working Capacity: \n\n-- Width of 1,350 mm (53"), constant passline height of 900 mm (35-1/2"). \n\n-- Min/max. working thickness of 8 - 200 mm (0.315 - 7.874"); the top structure lifts and lowers to set the part thickness. Feed Syste

D M C SYSTEM TC DOBBDP

DMC System

BUTFERING STO 113 L Widebelt Sander, 53 " Capacity; Combination head, 53" Cap.; electronically controlled air cushioned finishing platen, 20 HP motor; Specifications: \n\n-- 53 " x 75" Abrasive belt with dual infrared eye belt tracking. \n\n-- Air jet abrasive belt cleaning. \n\n-- 1 HP Feed drive, variable conveyor belt speed from 10 - 50 FPM. \n\n-- Motorized thickness adjustment 0" - 6" w/LED display for 0.004" increment adjustments. Equipped 

BUTFERING STO 113 L

Bütfering

HOLZ-HER 1436 SE PVC EDGEBANDER Max 5/16" (8 mm) solid wood banding & 4 mm PVC cap., 1-3/4" max. panel thickness, 7" min. panel length, and 2-3/8" min. width. Great machine with PLC CONTROLLER...ready to go! Cartridge glue system & "quick melt" feature (3 to 4 minutes heat-up time), automatic magazine for coil, strip, and solid Edgebanding, HD guillotine for 3 mm PVC, glue applicator nozzle with height and flow control. Equipped with: \n\n--Pneum

HOLZ-HER 1436 SE PVC

HOLZ-HER

HOLZ-HER 1436 SE

LAGUNA SMART SHOP II CNC Router, 5' X 10' with ATC and Lathe: 60" x 120" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with T-slots including manual controls. \n\n-- Specifications: 5' x 10' x 9.5" Axis travel with 12" clearance under the gantry, Speeds of 900 IPM, rapid travel with 600 IPM maximum cutting speed. \n\n-- Spindle: (1) 7.5 HP liquid cooled spindle with (ATC), 9,000 - 24,000 RPM Range, 

LAGUNA SMART SHOP II

Laguna

WEEKE BHX 055 HSK CNC Machining Center (Vertical). Flexible "Vertical" Machining Center that uses less than 5 meter² of valuable floor space in addition to an innovative panel handling system. \n\n-- Working Cap.: Max. workable part size for "X" axis is 120" (3,050 mm), "Y" axis 33.4" (850 mm), and max. part thickness 2.4" (60 mm). Min. worktable part size for "X" axis is 7.8" (200 mm), "Y" axis 2.7" (70 mm), min. part thickness of .47" (12 mm). 

WEEKE BHX 055

Weeke

Weeke BHX 055

WEINIG U17A 5-Head Feed Through Moulder with Hopper Feed \n\n-- 5-Head (B-R-L-T-B), 6-5/8" x 4-3/4" working capacity. Head sequence: \n\n-- Bottom 7.5 HP \n\n-- Right 7.5 HP, \n\n-- Left 7.5 HP, \n\n-- Top 15 HP \n\n-- Bottom 10 HP \n\n-- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. \n\n-- Feed drive 7.5 HP variable from 18 - 118 FPM. \n\n-- Motorized raise-and-lower of overhead feed beam, \n\n-- Air loaded feed/holddown wheels Also inc

WEINIG U 17 A

WEINIG U17A

HOLZ-HER 1320-2 EDGEBANDER Max. 5/16" (8 mm) solid wood banding &amp; 3 mm PVC cap., 1-3/4" max. panel thickness and 5-1/2" min. panel length. Equipped with: \n\n-- Cartridge glue system w/cartridge hopper &amp; "quick melt" feature, automatic magazine for coil, strip &amp; solid edgebanding; HD guillotine for 3 mm PVC, glue applicator nozzle. \n\n-- Pressure section with (1) large dia. drive roller &amp; (2) idle rollers, each w/individual pneum

HOLZ-HER 1321-2 SPRINT

HOLZ-HER Sprint

RIPPER, SINGLE SH|Z-MACHINE IS ON CONSIGNMENT BY A LOCAL CONTRACTOR. AS IS WHERE IS WITH NO WRITTEN OR IMPLIED WARRANTY INCLUDING SAFETY ITEMS. MACHINE HOURS MAY VARY AS IT IS STILL IN USE|EROPS|

All— 10,738

WEIMA WL 4S

CEFLA CR-180 ROLLER CURVE

GIARDINA GP JET 10

WADKIN K-23

QUICK 20 SECTION

NORTHTECH SL-1000XL

CEFLA PRE / IRM TTE 3000

WADKIN K-23

FORTIS DRPU-100

TIMESAVERS 2331-45-006

TIMESAVERS 137-2 HP75

MEREEN JOHNSON 2020

BIESSE ELIX

QUICKWOOD PRO 1400

TAYLOR 40 SECTION-A

STANMAC MC/UV 200

COSTA KKCC-CCC-1350

SHOP SABRE 4896

DIEHL ESL-25-II

DODDS C-48J

WEBER KSF4 1350 DDDD / KSF 3 – 1350 COO

BUSELLATO JET 6000 XL

NORTHTECH NT-1300RRC-LTD

VOORWOOD A 11

UNIQUE 4540

VIET S2 321 2200

WEINIG H 23 C/001

DODDS SE 15 S

EXTREMA XS-3B37

GIBEN SMART 75 SP

DIEHL SL-50

Felder BF6-31

NORTHFIELD 240

D M C SYSTEM TC DOBBDP

BUTFERING STO 113 L

HOLZ-HER 1436 SE PVC

LAGUNA SMART SHOP II

WEEKE BHX 055

WEINIG U 17 A

HOLZ-HER 1321-2 SPRINT